The installation of an SPC floor is a meticulous and skilful process. Here are the main steps of SPC floor installation:
1. Preparation
Ground inspection: Ensure that the ground is smooth, dry, and free of impurities such as oil and water stains. The uneven ground should be filled or polished to ensure that the ground level meets the requirements.
Environmental adaptation: The floor needs to adapt to the new environment before installation, it is usually recommended to place for 3 days, and keep the indoor temperature matters, avoid direct sunlight and large temperature changes.
Tools: Prepare all required tools, such as rolls, utility knives, sharp blades, rubber mallets, levels, goggles, saw, and gloves.
Second, ground treatment
2.Lay a moisture-proof film: Lay a moisture-proof film on the ground to prevent the impact of moisture on the floor. The moisture-proof film should be laid smoothly, and the film should be aligned with the film
Prelaying floor: According to the size and shape of the room, the SPC floor is prelaid to determine the laying effect and cutting plan.
Three, formal installation
3.Determine the installation position: Determine the installation position of the first row of floors and mark them. Make sure the short sides of the floor are parallel to the wall and allow for appropriate expansion joints.
Install the first row of floors: Place the first row of floors according to the marked positions. Use a special tool or a rubber mallet to gently tap the short edge of the floor to ensure that the latches are tightly connected to the floor. At the same time, check whether there are appropriate gaps between the floor and the wall.
Henan Ziteng Decoration Materials Co., Ltd is established in 2017, the area of the factory is about 15000 square meters, it is located in Fenchen Industrial Park, Xiangcheng County, Xuchang City, Henan Province. Henan Ziteng Decoration Materials Co., Ltd is an industrial enterprise whom specialize in developing, producing and sales, the mainly product are SPC flooring, LVT flooring, SPC wall panel and stair tread, and the annual output is about 2-2.5 million square meters. We have exported more than 50 countries like Thailand, Vietnam, Malaysia, Indonesia, philippines, Mynamar, Kenya, New Zealand, Australia, USA and so on. SPC product have been widely used for kinds of hotels, commercial buildings, hospitals, schools, cooking rooms,and washing rooms.
Splicing floor: Splicing the remaining floors one by one. When splicing, first press the male slot of the floor into the female slot completely, and then push it into the female slot. Make sure there are appropriate gaps between each row of floors, and use a rubber mallet to gently tap the floor so that it fits tightly into the ground.
Special areas: If you encounter special areas such as door frames and corners, mark them before cutting them to ensure that the floor is neatly laid and beautiful.
4. Finishing up
Installation of edge strip: After the floor is laid, the edge is sealed with a special edge strip to increase the beauty and anti-slip.
Check and adjust: Check all floors as a whole to ensure that the floor is smooth, no height difference, and even gaps. If there is a problem, timely adjustment and repair.
Cleaning and maintenance: Use a vacuum cleaner or mop to remove dust and debris from the floor and keep the floor dry and clean. At the same time, avoid sharp objects scratching the floor surface, and carry out regular maintenance.
Henan Ziteng Decorative Materials Co., Ltd. is a professional manufacturer of lvt flooring in China, we provide customers with high quality lvt flooring，
5. Precautions
Avoid violent operation: When installing the floor, avoid using violent or dangerous operation methods to avoid damaging the floor or lock.
Temperature control: Before and during the installation of the floor, the indoor temperature should be controlled within the appropriate range to avoid the expansion or contraction of the floor due to temperature changes.
Reserve expansion joints: Reserve appropriate expansion joints between the floor and the wall to cope with the expansion and contraction of the floor due to temperature changes.
In short, according to the above steps and precautions for the installation of SPC floor, you can ensure the quality of the floor paving and the use of the effect. During the installation process, be careful, patient and follow professional instructions.
We’re a professional manufacturer of spc flooring, lvt flooring, spc wall panel and spc stairs in Henan province, China.
